Practice is the criterion for testing truth. Polyaluminium chloride is an inorganic flocculant. Today, Xinhuan Company uses experiments to tell you how to increase the flocculation speed of polyaluminium chloride. The experimental results will tell you how to increase the flocculation speed of polyaluminium chloride. The flocculation effect and flocculation speed of polyaluminium chloride will be completely different under different conditions. Then, the influence of polyaluminium chloride on the direct effect is concluded through experiments and water quality conditions as follows:
1. Direct filtration process is economical and effective as a water treatment process that is simplified compared with traditional treatment methods.
2. In order to achieve good results of direct filtration, it is necessary to appropriately add coagulant polyaluminum chloride before filtration to improve the surface properties of the colloid; and the amount of coagulant can be reduced by 40%~50% compared with traditional processes.
3. When polyaluminum chloride is used as a coagulant, the following factors have an impact on the effluent turbidity index in the following order: coagulant dosage, filtration rate, coagulant dosage and influent turbidity. The impact on the total head loss index is in the following order: coagulant dosage, coagulant dosage, influent turbidity and filtration rate.
4. When aluminum sulfate is used as a coagulant, the following factors have an impact on the effluent turbidity index in the following order: coagulant dosage, filtration rate, influent turbidity and coagulant dosage. The impact on the total head loss index is in the following order: filtration rate, coagulant dosage, influent turbidity, coagulant dosage. The effect on natural water sources or when water quality parameters (such as water temperature, pH value, etc.) change needs to be determined through further experimental research.
Whether the flocculation effect of polyaluminum chloride is good or bad also requires you to have a good process design when choosing the same good quality long-distance run, and you can carefully operate it with experienced technicians before treating sewage.
The main products of flocculant manufacturer Xinhuan Water Treatment are:
White polyaluminium chloride (food grade), drinking grade polyaluminium chloride, industrial grade polyaluminium chloride, anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide, petroleum recycling polyacrylamide, oil recovery polyacrylamide, polyacrylamide, polymer flocculant polymer flocculation coagulant, polymeric ferrous sulphate, polyferric aluminium chloride and other water treatment chemicals. Welcome customers to write to us to negotiate business! Tel/WhatsApp：+8619003830067 Email：joanna@xhwtm.com Contact:Joanna
