When we use polyaluminium chloride PAC, if we find agglomeration, we should first analyze the cause of agglomeration. Today, Henan Xinhuan polyaluminium chloride manufacturer has summarized two reasons for polyaluminium chloride agglomeration!
The first is agglomeration caused by being wetted by rain or moisture. If the agglomeration phenomenon is not serious, polyaluminium chloride can be placed in the sun to dry the water inside and then broken. It can be broken into powder and can be used continuously. If the agglomeration phenomenon is more serious, it is recommended not to continue to use it, otherwise it is likely to become insoluble.
The second is the normal kneading agglomeration phenomenon. In the production process of polyaluminium chloride PAC, some moisture will not be completely evaporated before it is packed into the package, and it will agglomerate when kneading. This kind of agglomeration is normal agglomeration. Don't worry, just add it directly to the water and it can be completely dissolved. It should be noted that if the agglomeration is large, we should use a wooden stick to knock the large piece into small pieces before it can be used.
However, if you pay attention to some minor problems during the transportation of polyaluminium chloride, you can prevent polyaluminium chloride from getting damp and agglomerating during transportation.
1 Prevent moisture corrosion: If the interior of the carriage is damp or leaks out to the outside of the carriage during transportation, the powdered polyaluminium chloride PAC will easily agglomerate due to the corrosion of moisture in the air, which may seriously affect its own efficacy.
2 Prevent mixing with other chemicals: Polyaluminium chloride PAC should be placed separately during transportation and should not be mixed with other chemical reagents to prevent chemical reactions and affect the function of the product.
3 Prevent direct contact with the outside world: Polyaluminium chloride PAC should be transported under sealed conditions and cannot be directly exposed to the outside world. Long-term exposure to the sun may cause changes in the molecular structure of polyaluminium chloride PAC.
The transportation requirements for liquid polyaluminium chloride PAC are more stringent. Check whether each can is leaking. If found, it should be replaced in time.
The main products of flocculant manufacturer Xinhuan Water Treatment are:
White polyaluminium chloride (food grade), drinking grade polyaluminium chloride, industrial grade polyaluminium chloride, anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide, petroleum recycling polyacrylamide, oil recovery polyacrylamide, polyacrylamide, polymer flocculant polymer flocculation coagulant, polymeric ferrous sulphate, polyferric aluminium chloride and other water treatment chemicals. Welcome customers to write to us to negotiate business! Tel/WhatsApp：+8619003830067 Email：joanna@xhwtm.com Contact:Joanna
